With AF Series, you can change through holes into pin inserts.
Mounter should have automatic recognition system (You need reflow to fix it in through hole)
Various parts can be mounted (diameter:0.40~1.0φ)
You can order bulk type (no adsorption pin) AF-0.5(L)-B (add -B for bulk type [100/package])
Notice: Please insert male pin vertically
Capacity of Insertion and Removal....not over 100 times
Contact Resistance....not over 10mΩ
Current Capacity.... AF-0.5()..2A AF-0.7()..4A AF-0.9()..6A
Finish....Au plating over Ni
Material....Be-Cu (adsorption pin..Aluminium)
Operating Temperature....-40~+125°C
Process.... 1. Print Cream Solder on PCB(Recommended Metal Mask Thickness…100~150μ) 2. Mount AF Series(Please use automatic recognition type mounter) 3. Reflow 4. Remove adsorption pin by pushing from the bottom
Recommended Metal Mask Thickness....100~150µ ※AF series can be mounted on any thickness of PCB
(L) ... force to insert is less than that of (H)
(H) ... force to insert is more than that of (L)
※ ... The forces in the list are to insert (or remove) into the center of the holes